Machining Tools Solution Malaysia

Syarikat kami memfokuskan penyediaan alat pemesinan dan alat pengukuran berketepatan tinggi yang direka khas untuk memenuhi keperluan industri yang menuntut tahap ketepatan yang sangat tinggi. Dengan rangkaian alat yang disesuaikan untuk pemesinan berketepatan, kami memastikan pelanggan kami dapat mencapai prestasi dan kebolehpercayaan yang unggul dalam proses pengeluaran mereka.

Selain itu, kami turut menawarkan pilihan instrumen pengukuran yang menyeluruh bagi menyokong kawalan kualiti yang tepat dan cekap. Alat ini amat penting untuk mengekalkan konsistensi dan ketepatan dalam aplikasi industri, sekali gus membantu perniagaan memenuhi tolerans yang ketat serta piawaian kualiti yang tinggi. Sila hubungi kami sekiranya anda ingin mengetahui lebih lanjut mengenai MEGA MICRO CHUCK.

A collet chuck holder for endmilling that makes both high speed and powerful endmilling possible.

• Collet designed for heavy duty gripping force

The shallower taper and long tool shank clamping length of the MEGA E Collet improve concentricity and gripping force in order to achieve better surface finishes and stable clamping performance.

Lihat lebih lanjut...

Complete fit of nut and body. The evolved Milling Chuck, equal to integration with machine spindle.

• Complete fit of nut and body

Tightening the nut achieves dual contact between the body and end surface of the nut.This superior rigidity assures heavier duty machining without chatter.

Lihat lebih lanjut...

For versatile high-precision machining including molds and automotive components. This high-precision hydraulic chuck holder allows for easy tool attachment/removal using a single wrench.

Lihat lebih lanjut...

The ultimate precision hydraulic chuck series.
Amazing runout accuracy within 1μm at 4D.
 

• Amazing runout accuracy within 1μm at 4D.

Repeatability
Model: HSK-E32-HDC4S-52UP
Measurement frequency: 30 times
Measurement point: 4D (16mm) tip

Our chuck holder now offers a runout calibration mechanism.
Compensates for increased runout of machine tool spindles caused by extended use. Uniform hole diameter, improved surface roughness & extended tool life.
 

• Simple structure allows for easy adjustment of runout accuracy

1.

Lihat lebih lanjut...

Highly rigid Milling chuck for resistance against chatter. The BIG original slit mechanism supports high power and high-precision endmilling from heavy cuts to fine cuts.

Lihat lebih lanjut...

Our chuck holder now offers a runout calibration mechanism.
Compensates for increased runout of machine tool spindles caused by extended use. Uniform hole diameter, improved surface roughness & extended tool life.
 

• Simple structure allows for easy adjustment of runout accuracy

1.

Lihat lebih lanjut...

The unique Key Grip locking mechanism prevents the tool from slipping or pulling out during heavy machining. For machining difficult-to-cut materials such as titanium or Inconel. Accepts industry standard Weldon flat cutters. (Can be used with additional machining for tools without a flat section.

Lihat lebih lanjut...

Optimal operation with eliminated workpiece/jig interference is achieved in deep endmilling, wall machining and precision mold machining.

Interference-free tool layout is available without special equipment with just one wrench. A side lock holder in a class above the rest with superior balance and BIG-PLUS effect.

• Runout accuracy within 5μm

2-flute ball endmills achieve a runout accuracy within 5μm. Both easy handling of side lock holder and high accuracy are realized.

Lihat lebih lanjut...

60°serrated contact system offers rigid connection. Ultimate rough boring head fulfilling all the requirements

• Rigid design for heavy cutting.

60°serrated connecting system for head and cartridge offers high rigidity.

Lihat lebih lanjut...

Rough SW boring head integrated with the Smart Damper! Specialized dynamic damper proven in finish boring is further enhanced.
Chatter is eliminated instantaneously even in heavy rough boring.

• Boring head with a built-in damper.

Closely adjacent vibrating point and damper achieve a high damping effect.

Priority is given for unique and multi-functional uses.

• Rigid balanced cutting is available

RW Head is designed for adjustment to both radial and axial directions. Cartridges are standard for through-hole and blind-hole boring, thus universal for various requirements.

Achieves high efficiency small diameter rough boring with 2 inserts.
Designed with versatile ø20 cylindrical shank.
Spiral groove for improved chip evacuation.

• Precise serration

Serrated to firmly clamp two cartridges in place.

Lihat lebih lanjut...

Rough boring head with positioning pin.

• Positioning pins securely hold the head.

Using the position pin fastens the head or clamp base to the side. This can prevent the head from flying off.

• Lighter weight for greater speed (aluminum type)

Uses hardened aluminum components, tough yet lightweight.

Lihat lebih lanjut...

More versatile in function and performance by a new design concept.
Back boring available as standard. Abundance of insert holders.

Lihat lebih lanjut...

Unique dynamic damper eliminates chatter!
Integrated EWN BORING HEAD and SMART DAMPER.

• Boring head with a built-in damper.

Closely adjacent vibrating point and damper achieve a high damping effect.

Lihat lebih lanjut...

The advanced digital boring head born from ultra-precision technology.
Display Resolution 1μm/φ
Fully waterproof and dustproof structure (IP69K equivalent).
 

• Digital display allows the adjustment amount to be read instantaneously.

Employs a system that directly measures the stroke of the adjustment quill.

Lihat lebih lanjut...

Bore diameter adjustment simultaneously compensates imbalance.
Thus, stabilized boring at high speed is possible.
Quick adjustment within micron tolerance

• Automatic precision balancing.

Rotating scale screw moves a counterweight in the opposite direction of the cutting edge, therefore, imbalance compensation is made automatically.

Rough boring head with positioning pin.

• Positioning pins securely hold the head.

Positioning pin locates boring head or balance weight to slide securely and also prevents slipping of boring head when rotate the unit over speed by accidently.

Lihat lebih lanjut...

Our full lineup of cylindrical tool series products allows for versatile deep hole boring. The ultra-precise head can be adjusted to the micron, making even difficult small diameter boring possible.

Lihat lebih lanjut...

Advanced digital boring head created by ultra-precision technology.
Wide variety of carbide toolholder
Fully waterproof and dustproof structure (IP69K equivalent).
Display Resolution 1μm/φ.
Automatic power off function.

Lihat lebih lanjut...

Manual balance adjustment mechanism.
5μm/ø scale precision diameter adjustment mechanism. (EWB2-50 only).
Wide variety of carbide toolholder.

• Manually balanceable design

Rotating Balance Ring moves counterweight inside for balance adjustment.