Machining Tools Malaysia

除了高精度和多功能性之外，它还能实现高速加工。丰富的种类也使其成为可靠的通用夹头的理想选择。

• 1微米高精度夹头

• 双向冷却液供应

• 种类繁多的夹头本体

夹头的理想长度和直径是精密加工的关键。从我们提供的多种选择中挑选最佳方案。

A collet chuck holder for endmilling that makes both high speed and powerful endmilling possible.

• Collet designed for heavy duty gripping force

The shallower taper and long tool shank clamping length of the MEGA E Collet improve concentricity and gripping force in order to achieve better surface finishes and stable clamping performance.

Complete fit of nut and body. The evolved Milling Chuck, equal to integration with machine spindle.

• Complete fit of nut and body

Tightening the nut achieves dual contact between the body and end surface of the nut.This superior rigidity assures heavier duty machining without chatter.

For versatile high-precision machining including molds and automotive components. This high-precision hydraulic chuck holder allows for easy tool attachment/removal using a single wrench.

The ultimate precision hydraulic chuck series.
Amazing runout accuracy within 1μm at 4D.
 

• Amazing runout accuracy within 1μm at 4D.

Repeatability
Model: HSK-E32-HDC4S-52UP
Measurement frequency: 30 times
Measurement point: 4D (16mm) tip

High-precision collet chuck system with an accuracy of 1 micron at nose. The perfect tool to use in drilling, endmilling, reaming and tapping.

• High-precision collet equal to the sub-micron level

The New Baby Chuck collet uses knowledge cultivated through years of experience to produce the world's highest precision collet program.

Our chuck holder now offers a runout calibration mechanism.
Compensates for increased runout of machine tool spindles caused by extended use. Uniform hole diameter, improved surface roughness & extended tool life.
 

• Simple structure allows for easy adjustment of runout accuracy

1.

Highly rigid Milling chuck for resistance against chatter. The BIG original slit mechanism supports high power and high-precision endmilling from heavy cuts to fine cuts.

Our chuck holder now offers a runout calibration mechanism.
Compensates for increased runout of machine tool spindles caused by extended use. Uniform hole diameter, improved surface roughness & extended tool life.
 

• Simple structure allows for easy adjustment of runout accuracy

1.

The unique Key Grip locking mechanism prevents the tool from slipping or pulling out during heavy machining. For machining difficult-to-cut materials such as titanium or Inconel. Accepts industry standard Weldon flat cutters. (Can be used with additional machining for tools without a flat section.

Interference-free tool layout is available without special equipment with just one wrench. A side lock holder in a class above the rest with superior balance and BIG-PLUS effect.

• Runout accuracy within 5μm

2-flute ball endmills achieve a runout accuracy within 5μm. Both easy handling of side lock holder and high accuracy are realized.

60°serrated contact system offers rigid connection. Ultimate rough boring head fulfilling all the requirements

• Rigid design for heavy cutting.

60°serrated connecting system for head and cartridge offers high rigidity.

• Boring head with a built-in damper.

Closely adjacent vibrating point and damper achieve a high damping effect.

Priority is given for unique and multi-functional uses.

• Rigid balanced cutting is available

RW Head is designed for adjustment to both radial and axial directions. Cartridges are standard for through-hole and blind-hole boring, thus universal for various requirements.

Achieves high efficiency small diameter rough boring with 2 inserts.
Designed with versatile ø20 cylindrical shank.
Spiral groove for improved chip evacuation.

• Precise serration

Serrated to firmly clamp two cartridges in place.

Rough boring head with positioning pin.

• Positioning pins securely hold the head.

Using the position pin fastens the head or clamp base to the side. This can prevent the head from flying off.

• Lighter weight for greater speed (aluminum type)

Uses hardened aluminum components, tough yet lightweight.

More versatile in function and performance by a new design concept.
Back boring available as standard. Abundance of insert holders.

Unique dynamic damper eliminates chatter!
Integrated EWN BORING HEAD and SMART DAMPER.

• Boring head with a built-in damper.

Closely adjacent vibrating point and damper achieve a high damping effect.

The advanced digital boring head born from ultra-precision technology.
Display Resolution 1μm/φ
Fully waterproof and dustproof structure (IP69K equivalent).
 

• Digital display allows the adjustment amount to be read instantaneously.

Employs a system that directly measures the stroke of the adjustment quill.

• Automatic precision balancing.

Rotating scale screw moves a counterweight in the opposite direction of the cutting edge, therefore, imbalance compensation is made automatically.

Rough boring head with positioning pin.

• Positioning pins securely hold the head.

Positioning pin locates boring head or balance weight to slide securely and also prevents slipping of boring head when rotate the unit over speed by accidently.

Our full lineup of cylindrical tool series products allows for versatile deep hole boring. The ultra-precise head can be adjusted to the micron, making even difficult small diameter boring possible.