Cutting Tool Malaysia

The ultimate precision hydraulic chuck series.
Amazing runout accuracy within 1μm at 4D.
 

• Amazing runout accuracy within 1μm at 4D.

Repeatability
Model: HSK-E32-HDC4S-52UP
Measurement frequency: 30 times
Measurement point: 4D (16mm) tip

60°serrated contact system offers rigid connection. Ultimate rough boring head fulfilling all the requirements

• Rigid design for heavy cutting.

60°serrated connecting system for head and cartridge offers high rigidity.

• Boring head with a built-in damper.

Closely adjacent vibrating point and damper achieve a high damping effect.

Priority is given for unique and multi-functional uses.

• Rigid balanced cutting is available

RW Head is designed for adjustment to both radial and axial directions. Cartridges are standard for through-hole and blind-hole boring, thus universal for various requirements.

Achieves high efficiency small diameter rough boring with 2 inserts.
Designed with versatile ø20 cylindrical shank.
Spiral groove for improved chip evacuation.

• Precise serration

Serrated to firmly clamp two cartridges in place.

Rough boring head with positioning pin.

• Positioning pins securely hold the head.

Using the position pin fastens the head or clamp base to the side. This can prevent the head from flying off.

• Lighter weight for greater speed (aluminum type)

Uses hardened aluminum components, tough yet lightweight.

More versatile in function and performance by a new design concept.
Back boring available as standard. Abundance of insert holders.

Unique dynamic damper eliminates chatter!
Integrated EWN BORING HEAD and SMART DAMPER.

• Boring head with a built-in damper.

Closely adjacent vibrating point and damper achieve a high damping effect.

The advanced digital boring head born from ultra-precision technology.
Display Resolution 1μm/φ
Fully waterproof and dustproof structure (IP69K equivalent).
 

• Digital display allows the adjustment amount to be read instantaneously.

Employs a system that directly measures the stroke of the adjustment quill.

• Automatic precision balancing.

Rotating scale screw moves a counterweight in the opposite direction of the cutting edge, therefore, imbalance compensation is made automatically.

Rough boring head with positioning pin.

• Positioning pins securely hold the head.

Positioning pin locates boring head or balance weight to slide securely and also prevents slipping of boring head when rotate the unit over speed by accidently.

Our full lineup of cylindrical tool series products allows for versatile deep hole boring. The ultra-precise head can be adjusted to the micron, making even difficult small diameter boring possible.

Advanced digital boring head created by ultra-precision technology.
Wide variety of carbide toolholder
Fully waterproof and dustproof structure (IP69K equivalent).
Display Resolution 1μm/φ.
Automatic power off function.

• Manually balanceable design

Rotating Balance Ring moves counterweight inside for balance adjustment.

Unique dynamic damper eliminates chatter.
CK shank basic holder with a built-in damper.

• Chatter suppressing mechanism

An incorporated unique damper that functions as both a counter damper and friction damper.
Patent-pending counter weight maximizes effect of the friction damper.

Compensates for synchronization errors during synchronized tapping Improves thread quality and tap life by reducing thrust loads caused by synchronization errors up to 90%.

• Unique new mechanism built in to compensate for synchronization errors

Improves thread quality and tap life by reducing thrust loads caused by synchronization errors up to 90%.

Flexible tool layout in combination with the CK Shanks. Tap Collet type enables quick tap change.

• Chatter suppressing mechanism

An incorporated unique damper that functions as both a counter damper and friction damper.
Patent-pending counter weight maximizes effect of the friction damper. Chatter is absorbed effectively and higher machining accuracy is achieved.

Face mill arbor capable of securely supplying coolant/air to cutting edges through oil holes of cutters.

• Securely supplies coolant/air to the cutting edge

The FMH models analyze the structures of coolant holes and then calculate and standardize the ejection amount. Ideal for high efficiency radius cutters and plunge milling cutters.